۴ محور کنترل کننده فرزکاری
کنترل کننده میلز TAC-1004M یک نسل جدید از سیستم CNC است که توسط TOMATECH ساخته شده است. به عنوان نسخه ارتقا یافته، از چرخه حفاری، حفاری و حفاری پشتیبانی می کند. این شرکت ۳۲ بیت CPU با توان بالا و دستگاه FPGA قابل برنامه ریزی را در مقیاس وسیع دارد، تکنولوژی کنترل چند کاره و تکنولوژی درونیابی سخت افزاری را در زمان واقعی اجرا می کند و قادر به کنترل کنترل دقیق سطح و کنترل PLC منطق PLC می باشد.
● سه محور کنترل؛ ۴ محور اتصال؛ ۲ آنالوگ اسپیندل
● ۱ms چرخه درونی، ۰٫۱μm دقت کنترل.
● دو کانال -۱۰V ~ 10V ولتاژ خروجی آنالوگ، پشتیبانی از کنترل دو اسپیندل
● نوع خطی، نوع شاخص و نوع S و غیره. انواع شتاب و کاهش سرعت را می توان انتخاب کرد.
● با برنامه نویسی PLC جاسازی شده، PLC فعلی در حال اجرا می تواند انتخاب شود
● PLC به صورت آنلاین، نظارت بر زمان واقعی نمایش داده می شود، سیگنال ردیابی زمان واقعی را نشان می دهد
● پشتیبانی از نوع برنامه ریزی ماکرو بیانیه، پشتیبانی از کدهای مخرب با تماس با پارامترها.
● قابلیت نفوذ انعطاف پذیر و ضربه محکم و ناگهانی را می توان با پارامترهای تعیین شده ● شامل مارپیچ، پوسته پوسته شدن، مختصات قطبی، دایره ثابت
و انواع مختلف چرخه عملکرد چکان.
● شامل فعالیت های آلارم تاریخی و عملیات resumen، آن را برای کاربران مناسب برای کار و نگهداری است.
● پشتیبانی از رمز عبور چند سطح برای تعمیر و نگهداری و مدیریت تجهیزات
● ۳۶ نقطه عمومی ورودی / ۳۶ نقطه خروجی عمومی
● پشتیبانی استاندارد RS232 و پورت USB، پشتیبانی اسناد دیسک U، پیکربندی سیستم و نرم افزار
به روز شده، می تواند توابع انتقال اسناد، پورت سریال DNC ماشینکاری و ماشینکاری آنلاین USB را برآورده کند
Control axis:
● Control axis: ۴ axis (X, Y, Z,4th)
● Linkage axis: ۴ axis Feeding axis functions
● Position command range:
Metric input (G21) -9999.9999mm ~9999.9999mm, the mininum command unit: 0.0001mm
Inch input (G20): -999.9999inch ~999.9999inch, the mininum command unit: 0.0001inch
● Electronic gear ration: command multiplier 1 ~ 65536, command multiplier1 ~65536
● Rapid traverse speed: maximum 60m/min
● Rapid traverse override: F0, 25%, 50%, 100% four levels real-time tuning
● Cutting feedrate: maximum feeding speed: maximum 15m/min (G94) or 500.00mm/r (G95)
● Feedrate override: 0 ~ 150% sixteen-level real-time tuning
● Manual feedrate: 0 ~ 150% sixteen-level real time tuning
● MPG feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears
● Single step feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears
● Interpolation mode: linear interpolation, arc interpolation, spiral interpolation and ragid rapping
● Automatic chamfering function
Acceleration/deceleration types:
● Cutting feeding: before the acceleration and deceleration linear type, before the acceleration and deceleration S
type, after the acceleration and deceleration linear type and after the acceleration and deceleration index type.
● Fast moving: before the acceleration and deceleration linear type, before the acceleration and deceleration S type,
after the acceleration and deceleration linear type and after the acceleration and deceleration index type.
●System with preview function, it can read 15 NC programming, make small line interpolation in high speed and
smooth, it’s suit for components machine toolings processing.
● The original speed of acceleration and deceleration, end speed and acceleration&deceleration speed set by
parameters.
● Manual mode, handwheel mode is after acceleration and deceleration control, handwheel mode can choose
emergency mode or full operation mode.
● Rapid positioning can choose linear or broken line.
Spindle axis functions:
● Two channels -10V ~ 10V analog voltage output, support double spindle control
● Spindle encoder: encoder lines can be set (100 p/r ~ 5000p/r)
● Encoder and spindle’s transmission ratio: (1 ~ 255):(1 ~ 255)
● Spindle ration: 50% ~ 120% eight stages real-time tunning in total
● Spindle axis constant line speed control
● Tapping circle, rigid tapping
Tool functions:
● Tool length compensation
● Tool point radius compensation (C type)
Precision compensation:
●Thread pitch error compenstation: Compensation points, compensation interval, compensate original position can
be set.
●Backlash compensation: can set reverse interval to interpolation machine tool by fixed frequency or lifting speed
mode.
PLC functions:
● Two levels PLC programming, operation speed is 1.5μs/ step basic instruction; 4700 steps mostly, the cycle of the f
irst level programming is 8ms.
● Support PLC warning and PLC alarm.
● Support multiply PLC programming (mostly 20), the current PLC programming can be chosen.
● ۴۵ kinds of commands (10 kinds of basic commands, 35 kinds of function commands)
● I/O unit input/output: 36/36
رابط صفحه نمایش:
● صفحه نمایش ۷ اینچی با رزولوشن ۸۰۰ در ۴۸۰ پیکسل
● چینی، انگلیسی و غیره صفحه نمایش زبان چند برابر
● مسیر ابزار ۲D نمایش داده می شود.
● زمان واقعی ساعت
حالت کاربری:
● حالت های عملیاتی: ویرایش، خودکار، ورودی، بازنشانی دستگاه ماشین، چرخ دستی / تک مرحله، کتابچه راهنمای، DNC.
● مدیریت چندگانه مدیریت چندگانه.
● زنگ هشدار
ویرایش برنامه:
● محدوده برنامه: ۵۶ مگابایت، آن را می توان به طور عمده ۴۰۰ برنامه ریزی ذخیره (شامل زیر برنامه نویسی، برنامه نویسی مارکو)
● تابع ویرایش: برنامه ریزی / برنامه نویسی بخش / بازیابی کلمه، اصلاح، حذف، کپی و چوب
● فرمت برنامه نویسی: کد ایزو، پشتیبانی از برنامه ماکرو بیانیه، پشتیبانی از مختصات نسبی، مطلق
هماهنگی و هماهنگی قطبی.
● تماس های برنامه نویسی: پشتیبانی از maco با فراخوانی پارامترها، لایه بندی زیر پروم ۴ سطح.
عملکرد ارتباطی:
● RS232: برنامه های جزئی، پارامترها و برخی از پرونده های دو طرفه، پشتیبانی از برنامه PLC، سیستم
نرم افزار پورت سریال به روز رسانی.
● USB: U دیسک مستندات operatiom، پردازش دیسک به طور مستقیم، پشتیبانی PLC برنامه، سیستم نرم افزار U دیسک
به روز رسانی.
● عملکرد پردازش DNC پورت سریال و تابع پردازش آنلاین USB، قابلیت اطمینان و ایمنی را پشتیبانی می کند
قابلیت اطمینان و قابلیت اطمینان
● توقف اضطراری
● محدودیت مسیر دستیابی
● بررسی مسیر نرم افزار
● پشتیبان گیری داده ها و بازیابی اطلاعات